CS-834 Silicone Series

It is mainly composed of adhesive and thermal conductive particles. Before gluing, it is a paste like mixture, and after gluing, it solidifies under certain time and conditions. Our thermal conductive silicone is a single component room temperature vulcanized silicone rubber with good adhesive properties. Room temperature curing The curing conditions are simple Repackable, with a curing thickness generally between 4-5mm. But it is sensitive to the surface state of the heat sink, and the bonding strength of devices or heat sinks with surface contamination is weak. Strict on-site process control.

1. Environmentally friendly, non-toxic, non corrosive, in compliance with ROHS and REACH directives.

2. Excellent adhesion, fixation, insulation, sealing, moisture resistance, shock resistance, and aging resistance.

3. It can firmly adhere to different materials such as metal, glass, ceramics, plastics, etc.

4. The cured silicone rubber has good electrical insulation performance, high and low temperature resistance, waterproof and moisture-proof, aging resistance, and long-term rubber elasticity.

performance index

Before curing: ① Appearance: gray paste ② Product type: condensation type ③ Viscosity (mpa. s, 25 ℃) ④ Relative specific gravity (25 ℃): 1.45 ± 0.05

Operational performance: ① Surface skinning time (min, 25 ℃): 10-30 ② Curing time (min, 25 ℃): 8-12 hours (3-5mm) ③ Curing time (min, 80 ℃)

After curing: ① Hardness (shore A): 45-55 ② Thermal conductivity [W (m · K): ≥ 0.6 ③ Dielectric strength (kV/mm): ≥ 17 ④ Dielectric constant (100MHz): 3.0

⑤ Volume resistivity (Ω· cm): ≥ 1.0 × 1014 ⑥ Dielectric loss tangent value (1MHz): ≤ 2.0 × 10-3

CS-834 single component room temperature cured silicone rubber has the following characteristics:

This product is a single component organic silicon compound, in the form of a gray paste.

This product has good high and low temperature resistance, earthquake resistance, corona resistance, anti leakage insulation, corrosion resistance, weather resistance and other characteristics. After solidification, the colloid can be used over a wide temperature range.

During the curing process, it does not shrink and has good waterproof, moisture-proof, and insulating properties.

Compliant with the EU ROHS directive requirements.

Mainly used for fixing electronic and electrical components, shock absorption, bonding, insulation, waterproof and moisture-proof functions. Such as switch power supplies, transformers, circuit boards, network transformers, household appliances and cooking utensils, outdoor equipment, etc.