CS-9816 two-component silicone sealant

Mainly used for sealing high-end indoor and outdoor LED display screens, LED lighting products, and non fully sealed electronic components such as circuit boards, it plays a role in bonding, sealing, waterproofing, and moisture resistance.

Due to the presence of filling materials in colloids, long-term storage of colloids may result in layering and sedimentation of fillers. Before use, mix the A/B/C components evenly before placing them in a mixing tank at a mass ratio of 10:1.

Pour the mixed adhesive into the device that needs to be sealed. Generally, vacuum defoaming is not necessary. If conditions permit, it is recommended to vacuum defoam before pouring. This product is room temperature curing type. The curing speed of adhesive is not closely related to the curing temperature, but to the proportion and content of B agent. The larger the B agent, the faster the curing speed (it is recommended to adjust the range of B agent from 100:7-100:12). It usually takes about 8 hours to cure at room temperature.

Unused adhesive should be stored in a sealed container. The storage period is 6 months (25 ℃). The mixed adhesive should be used up at once to avoid waste.

This product is non hazardous, but should not be ingested or seen.

Transportation: There are no regulations for domestic (CN-GB) or international (IMO, IATA, UN) transportation. Belonging to non dangerous goods.

characteristic:

The A component of this product is a black viscous liquid, while the B component is a transparent liquid. Two portions can be stored for a long time before mixing.

This product has good insulation, elasticity, corrosion resistance, weather resistance and other characteristics. After solidification, the colloid can be used over a wide temperature range. During the curing process, ethanol molecules are released, which will not corrode materials such as PC (Poly carbonate), PP, ABS, PVC, copper wire, etc. Good adhesion to most electronic component materials (except PP and PE).

＊ It does not shrink during curing, and has good waterproof, moisture-proof and anti-aging properties.

Compliant with the EU ROHS directive requirements.