Cs-885 silica gel series

Cs-885 silica gel series

Product classification:Electronic bonding silicone adhesive

Product Profile:Product Name: cs-885 silica gel series
Model: cs-885
Appearance: gray semi flowing
Specification: 310ML / bottle (390g / piece)
Hardness (Shore A): 40-50
Thermal conductivity [w (M & middot; K)]: & Ge; 0.6

Order Hotline: 0755-27103658 Immediate consultation

Share to:
It is mainly composed of adhesive and heat conducting particles. Before sizing, it is a paste like mixture. After sizing, it solidifies under certain time and conditions. Our heat-conducting silica gel is a one component room temperature vulcanized silicone rubber, which has a good bonding effect. Room temperature curing, simple curing conditions, repairable, curing thickness generally between 4-5mm. However, it is sensitive to the surface state of the radiator, and the binding force of the surface polluted device or radiator is weak. Strict on-site process control.

1. Environmental protection, non-toxic, non corrosive, in line with RoHS and reach instructions.
2. Excellent adhesion, fixation, insulation, sealing, moisture-proof, shockproof and aging resistance.
3. It can be firmly bonded with metal, glass, ceramic, plastic and other materials.
4. The cured silicone rubber has good electrical insulation performance, high and low temperature resistance, water and moisture resistance, aging resistance and long-term rubber elasticity.
performance index
Before curing: ① external view: gray half flow; ② product type: condensation type; ③ viscosity; MPa. S, 25 ℃; ④ relative specific gravity (25 ℃): 1.25 & plusmn; 0.05
Operating performance: ① surface skinning time (min, 25 ℃): 10-30 & nbsp; ② curing time & nbsp; (min, 25 ℃): 8-12 hours (3-5mm) ③ curing time (min, 80 ℃)
After curing: ① hardness (Shore A): 40-50 & nbsp; ② thermal conductivity [& nbsp; w (M & middot; K): & Ge; 0.6 & nbsp; ③ dielectric strength (kV / mm): & Ge; 18-25 ④ dielectric constant (100MHz): 2.55
&Nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; ⑤ volume resistivity & nbsp; (& omega; & middot; cm): & Ge; 2.5 & times; 1014 & nbsp; ⑥ elongation at break (%): 130-170 & nbsp; ⑦ temperature range (℃): 60 ℃ - 250 ℃
It is mainly used for heat dissipation (heat conduction), fixation, shock absorption, bonding, insulation and other functions of high-power electronic and electrical components. Such as switching power supply, transformer, high power LED, network transformer, router, etc
Cs-885 single component room temperature curing silicone rubber (heat conduction type), with the following characteristics:
* this product is a single component organic silicon compound, which is a gray semi fluid.
* this product has good thermal conductivity, high and low temperature resistance, earthquake resistance, corona resistance, leakage resistance insulation, corrosion resistance, weather resistance and other characteristics. After curing, the gel can be used in a wide temperature range (- 60-250 ℃).
* no shrinkage during curing, good waterproof, moisture-proof and insulation performance.
* meet the requirements of EU ROHS directive.  

Application scenario

Related products
No information